TECBOND 342 is an exceptionally strong, white hot melt adhesive formulated for use for Carton Closing where the board involved is very thick eg Triwall or very springy and also is ideal for bonding cables in the telephone or telecoms, alarm and computer industries where an instant bond is needed and the white colour prevents the adhesive from standing out as it matches the cable. It has an exceptionally high instant molten tack.  
All bonds should be tested at least 24 hours after assembly at both the high and low temperatures they will be expected to withstand in service.
342/43 is a white colour hot melt glue slug / stick suitable for use in 43mm diameter glue guns operating at 195°C.   It has a service temperature of -15°C to 75°C. 
The adhesive is packed in 1x10kg (original box) containing approximately 170 sticks:  43mm long, 43mm diameter.
To use this adhesive you will need a 43mm glue gun.  The ideal glue gun is the TEC 3200 however the TEC3150, TEC6100 and TEC7100 are also suitable which we are able to supply if needed.
Low & hot melt glues are thermoplastic, polymer based materials in solid form which contain no solvents, VOC’s or water and are non-hazardous, FDA approved and leave no risk of mould or odours in finished product. In use, they are heated, usually to between 130°C & 195°C and applied through a hot melt glue applicator or glue gun molten to one surface of the parts to be glued, when the surfaces are pressed together the hot melt quickly cools to form an almost instant bond. Generally, testing of a bond should not be made until at least 24 hours after the application. 
We only recommend the use of the TEC glue applicators as the adhesive performs best in these and we are available to advise you on glue gun choice using the contact details below.